2UUL SD16 Twist Plus 400 r/min High-Speed Electric Screwdriver with Torque Protection and Magnetic Bit Holder

One screwdriver. One job. The TWIST PLUS SD16 is the 400 r/min driver you keep on the bench and reach for without thinking — torque protection that stops before a screw strips, a magnetic tip that holds the bit and the screw, and an auxiliary light that puts light exactly where the fastener is. It wakes up when you turn it and sleeps when you set it down. Comes ready to work with a Phillips 1.5 mm bit already in the box.

• 400 r/min high-speed core — back out long screw runs in a fraction of the time, so tear-downs stop being wrist work and start being a rhythm.
• Torque protection — the drive cuts out the instant resistance spikes, so screws don't strip and thin flexes and mid-frames don't get chewed.
• Auto-sensing start, auto-sleep — it spins up the moment you start turning and goes quiet when you set it down. No trigger to hold, no power switch to hunt for mid-repair.
• Magnetic bit holder + auxiliary light — the bit seats firmly and stays with the tool, while the tip light puts bright, glare-free light exactly where the screw is, including inside dark chassis corners.
• 5-level indicator with mute switch — gear level 1 through 5 is readable at a glance from the on-body LEDs, and the mute switch kills the beeps without losing the visual feedback.
• Thumb-side forward / reverse control — directional buttons sit right where your thumb rests, so switching between loosening and tightening takes no repositioning.
• Compact, rugged, Type-C rechargeable — 145 mm and just 62 g, with a 500 mAh cell that charges over standard USB-C and a housing built to take bench life: drops, knocks and daily handling.

  

  Specification	Detail
  Brand	2UUL
  Product name	TWIST PLUS
  Model / Code	SD16
  Type	Cordless high-speed electric screwdriver (pen style)
  Max rotating speed	400 r/min
  Battery capacity	500 mAh
  Input voltage	5 V
  Charging port	USB Type-C
  Bit compatibility	Both 4 mm hex and 4 mm round shank bits
  Included bit	1 × Phillips 1.5 mm
  Gear levels	5 (with on-body LED indication)
  Controls	Forward / reverse directional buttons, mute switch
  Built-in features	LED status indicator · Auxiliary work light · Magnetic bit holder · Torque protection · Auto-sensing start & auto-sleep
  Product size	145 mm × 16.5 mm × 16 mm
  Net weight	62 g
  Gross weight	82 g
  Package size	205 mm × 155 mm × 18 mm